Product ID:MAGNOBOND 3900, PART A
MSDS Date:04/02/1998
FSC:5970
NIIN:01-058-1431
Kit Part:Y
MSDS Number: CBSFX

MAGNOLIA PLASTICS INC

5547 PEACHTREE INDUSTRIAL BLVD
CHAMBLEE, GA 30341-2234
US

Emergency Phone: 404-451-2777/800-457-4280

Info Phone: 404-451-2777/800-457-4280

Cage: 22121

MILNUCORP INC

SNELLVILLE, GA 30039 US

Telephone: 770-736-5094

Cage: 0RY69

EPOXY RESIN WITH NO ESTABLISHED TLV

METHYL ISOBUTYL KETONE (HEXONE) (SARA 313) (CERCLA);

CAS: 108-10-1

RTECS: SA9275000

OSHA PEL 100 PPM

ACGIH TLV: 50 PPM/75 STEL; 9596

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

XYLENES (O-,M-,P- ISOMERS) (SARA 313) (CERCLA)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 5-10%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM/150STEL;9596

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SEVERELY IRRIT EYES.MODERATELY
IRRIT SKIN/RESP TRACT.CHRONIC:LIVER/KIDNEY DMG.INHAL:VAP IRRT
NOSE/THROAT.HIGHER CONCEN CAUSE NAU,HEAD.INGEST:LG QUANT MAY CAUSE
NAU,HEAD.LIQ MODERATELY TOXIC,HARM FUL.SKIN ABSORP:DRY SKIN,CAUSE
DERM.SKIN:MOD-SEVERE IRRIT.PERM DMG POSSIBLE ON PROL
EXPO.EYE:SEVERELY IRRIT.PERM (SUPPL)
Explanation of Carcinogenicity:PER
MSDS:CARCINOGENICITY:NTP/IARC/OSHA:NO.
Effects of Overexposure:SEVERELY IRRIT EYES, MODERATELY IRRIT SKIN/RESP
TRACT. LIVER/KIDNEY DMG, PERM SKIN DMG, PERM EYE DMG. IRRIT
NOSE/THROAT. NAUSEA, HEADACHES. LIQUID MODERATELY TOXIC, HARMFUL.
DRY SKIN, DERMATITIS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN:REMOVE CONTAMIN CLOTH.WASH SKIN W/SOAP/WATER. EYE:FLUSH
W/WATER FOR 15MINS WHILE HOLDING EYELIDS OPEN.GET MED ATTN.
INHAL:REMOVE VICTIM TO FRESH AIR.ADMINISTER OXY IF NECESSARY.
INGEST:DO NOT IND UCE VOMITING.GIVE LARGE DOSES OF WATER.GET MED
ATTN.

Flash Point Method:TOC
Flash Point:=22.8C, 73.F
Autoignition Temp:Autoignition Temp Text:NP
Lower Limits:1.0
Upper Limits:8.0
Extinguishing Media:WATER SPRAY, FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:AVOID BREATH SMOKE.IN CONFINED AREAS FULL FIRE
FIGHTING EQPMT INCLUDING NIOSH APPROVED SELF-CONTAINED BREATHING
APPARATUS.COOL FIRE EXPO CNTNRS W/WATER.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM ALL POSSIBLE IGN
SOURCES.VAPORS ARE HEAVIER THAN AIR & MAY TRAVEL ALONG GROUND OR
MOVED BY VENTILATION.

Spill Release Procedures:AVOID CONTACT W/LIQ/VAP. WIPE W/CLOTH OR
COLLECT ANY ABSORBENT MATL. FOR LARGE SPILLS DIKE/CONTAIN. PUMP OR
SHOVEL INTO SALVAGE VESSELS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP AWAY FRM ALL IGN SOURCES.STORE IN
COOL DRY AREA TIGHTLY CLSD CONTNRS.AVOID CONTACT W/SKIN/EYES.USE
W/ADEQUATE VENTI.
Other Precautions:ELECTRICALLY GROUND ALL EQPMT WHEN HDNLG.VENT MORE
OFTEN/FREQUENTLY IN WARM WEATHER TO RELIEVE PRESSURE.FOR INDUSTRIAL
USE ONLY.MAY CAUSE SKIN IRRIT.AVOID CONTACT W/EYES.

Respiratory Protection:FOR EXCESSIVE VAP RO TO MAINTAIN BELOW TLV LIMIT
NIOSH APPROVED RESP IN COMPLIANCE TO 29 CFR 1910.134.
Ventilation:LOCAL EXHAUST/MECHANICAL:YES.
Protective Gloves:IMPERVIOUS RUBBER GLOVES.
Eye Protection:SPLASH-PROOF CHEM GOGGLES.
Other Protective Equipment:FOR PROLONGED EXPO IMPERVIOUS LCOTH/BOOTS TO
MIN PERSONAL CONTACT.EYE WASH STATION,SAFETY SHOWER.
Work Hygienic Practices:LAUNDER CONTAMIN CLOTH BEF REUSING.USE GOOD
INDUSTRIAL HYGIENE PRACTICES.
Supplemental Safety and Health
HEALTH HAZ:DMG POSSIBLE ON PROL EXPO. 2-PART KIT, SEE PNIND:C FOR PART
B, HCC:F4.

HCC:F3
Boiling Pt:=46.7C, 116.F
Vapor Pres:14
Vapor Density:3.5
Spec Gravity:1.00
pH:NP
Viscosity:NP
Evaporation Rate & Reference:1.0 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIQUID.
Percent Volatiles by Volume:35
Corrosion Rate:NP

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS & BASES.
Stability Condition to Avoid:ELEVATED TEMPERATURES.
Hazardous Decomposition Products:OXIDES OF CARBON & NITROGEN.
Conditions to Avoid Polymerization:LARGE MIXTURES IN BULK. CURING
PROCESS IS EXOTHERMIC.

Waste Disposal Methods:CURE,THEN BURY/INCINERATE.REMOVE SALVAGE VESSELS
TO WASTE DISPO SITE OPERATING IN COMPLIANCE W/FED/STATE/LOC
REGULATIONS.CERCLA SEC 102/SARA TITLE III SEC 313:MIBK
25-30%,RQ:5000LBS;XYLENE 5-15%,RQ:10 00LBS.RCRA:D001,IGN WASTE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.